===== Programming DECT phones =====

^  Handset:  ^  Base:  ^
| **Philips ARM PCD8008HL\\ AT24C64A (serial EEPROM)**  | **Philips ARM PCD80718HL\\ AT45DB081B (8Mbit 2.7V)\\ ST M24128BW (serial EEPROM)**  |
| <code>
    Gnd    pin4     SCL     pin2
     O       O       O       O
 O       O       O       O       O
+B     +EEP    pin3     SDA     pin1
</code> | <code>
    line+    Gnd    pin4     SCL     pin2
      O       O       O       O       O
  O       O       O       O       O       O
line-   11.2V   +EEP     pin3    SDA     pin1
</code> |

----
The above 2 connectors are almost identical with the addition on the telephone line to the left for the base.\\  
To program the serial EEPROM only 4 pins are needed (+EEP SCL SDA Gnd). The other pins are used for programming
the ARM processors.